Entirely developed in ITALY
Compatibile with Double Flask Technology®
Injection Fast® is the first injection system entirely conceived, designed and developed strong> from Dental Flex Italia. The injection system also called the press, it is a micro injection system that allows the development of flexible prostheses and other medical devices.
By continuous research Dental Flex Italia, a system with countless innovations, ease of use, high reliability, conceived, designed and developed in Italy.
50Hz – 60Hz
Double Flask Technology®
Double Flask Technology® is the main innovation of the system Injection Fast® span> strong> offer from Dental Flex Italy. This technology allows the operator to make two or more implants in a single cycle.
Consequently the DFT® application allows a save of time the materials used, but also a saving of energy used for each cycle.
For example, if an average lab makes 200 injections in a year, thanks to DFT® technology it will be able to reduce 50% of cycles (100 cycles). This imposes an enormous savings on production costs.
The combinations of possible development in the double muffle are very large, in fact it is possible to develop two complete dentures but also other combinations. For example, two partial prostheses + Two maintainers or a partial denture and three or four maintainers, and so on.
Flexibility of use
Injection Fast® allows to inject a special cartridge (IPER) that can contain up to 45 grams of any thermoplastic material. This feature is unique to Injection Fast® system, no other system currently offers what.
The system obviously Allow yourself to inject small amounts of materials, to achieve small or medium sized devices. The system in addition to the double muffle can without any problem to use the conventional single muffle.
The amount of material that this machine is able to be injected is such as to be able to cover the most diverse requirements even in presence of very big eaters. The ability to inject a greater quantity of material, provides excellent results, eliminating the risk of internal porosity due to lack of material.
The top cover has as its main features the safety of operators.
But this is not a simple cover, in fact, also for this part we employed a bit ‘of technology. Not only have we increased the security, but the lid also solves space problems.
The lid is equipped with a zipper with integrated switch. In case the operator during the machining cycle does not close the lid, you will be visually informed by a message on the display and an audible alarm.
In addition to the extra security, the side opening is designed for convenience and space optimization.
Conventionally, although other injection systems offer a lid that covers the housing of the muffle, in order to be opened , this should be reversed. This effectively increases length and consequently the system can not be positioned in correspondence of shelves.
We know how important it is to optimize the space in the workplace and this solution has been implemented to solve this problem.
One of the most frequent questions we receive, regards the pressure values.
To solve this problem we have integrated a special sensor that provides a real-time monitoring of pressure (in bar).
This device automates basic operations. The system is able to determine whether the pressure is sufficient to complete the cycle in an optimal way.
In the case in which the operator is warned visually it is not sufficient with a message on the display. If the pressure is to be under 6.5 bar strong>, the system will prevent the progress, until the minimum required value is not reached.
This will always work under optimum conditions and to reduce the possibility of errors.
With INJECTION FAST® you no longer have limits
From today thanks to Fast® Injection system you can inject dentures of the largest size.
It is well known that the injection systems currently on the market, are limited in the development of total prostheses of a certain size. The limitation is due to the amount of injection material. An extra large cartridge can hold up to a maximum 23 grams , and this in cases of very large prosthesis is not sufficient.
Injection Fast® rectifies this limit, thanks to the new DFT® technology, it is possible to inject more than 40 grams of material.
The greater amount of material must be able to be dissolved and fluid yield, but then it is necessary that the system has sufficient strength to be able to inject the quantity effectively in the muffle furnace.
With considerable force injection of about 1100 Kg per cm2, the system ensures optimum thrust but especially guarantees optimum control the retraction and high precision. This gives the full dentures a much higher adhesion than conventional techniques
Not only Prosthetics Flexible
Occlusal splints can be easily developed with Injection Fast®
Anti Snoring devices
The ability to develop anti transparent snoring devices or in natural color
Biocompatible thermoplastic molds for teeth protection used in combat sports.
Anti Bruxism devices
Offer your customers Anti Bruxism custom devices